Registrácia

Extruder: E90 x 30 D G

Extruder: E90 x 30 D G
- Screw diam. 90 mm, nitrited, L:D= 30:1,
- 5 heating zones on cylinder a 6 kW
- Drive: Variable aspeed frequency controlled AC-motor 90 kW

1 Screen changer manual Type SW 090
1 Die head Type DO 315
1 Trolley for pipe head support
1 Vacuum calibrating unit Sealing flange for each size
1 Water spray bath
1 Four belt take off
1 Planetary Cutting saw
1 Pipe collection table 6000 mm lenght
1 Gravimetric Computer system
1 Granulate Hopper Loader
1 Masterbatch dosing unit

Vyžiadajte si cenovú ponuku alebo ďalšie informácie

Popíšte, čo potrebujete. Čím presnejšie informácie uvediete, tým lepšiu ponuku môžete dostať.

Vyplňte prosím svoje kontaktné údaje a získajte cenové ponuky, referencie a ďalšie informácie.

Odoslaním súhlasím so spracovaním osobných údajov

Vaša požiadavka bola odoslaná.

  1. Zadanú požiadavku operátor spracuje.
  2. Požiadavka bude adresovaná vhodným dodávateľom.
  3. Spätne vás budú kontaktovať záujemcovia.
  4. Sami sa rozhodnete, koho si vyberiete.

Ďakujeme, že ste nás kontaktovali.

Ďalšie ponuky v sekcii: Strojárenstvo, stroje, priemysel

Single screw extruder 45mm x 30d

Single screw extruder 45mm x 30d

- Type E45 x 30D - Screw: d= 45 X 30 D, nitrited, - Cylinder: d= 45 X 30 D, nitrited, - 4 cylinder zones, zone 3 und 4 with cooling fan, - Water cooled feeding section, connection R 1/8´. Hopper 40 Litre. Drive: Frequenzgeregelter Drehstromantrieb 13 kW, 3000 u/min., Stellbereich 1 : 100, Fremdlüfter, Thermokontakt. ELEKTRIK: Schaltkasten für die Temperaturregelung, Zweipunktregler für Zone 1 und 2 auf dem Zylinder, Dreipunktregler für die Zonen 3 und 4. 2 zusätzliche Zweipunktregler für Werkzeugzonen, zugehörige Sicherungen, Solid-State-Relais, Schütze, Steckdosen, Thermofühlerausgänge und Thermofühler (FeCuNi). MOTORSTEUERUNG: EIN/AUS-Leuchttaster, NOT/AUS-Taster, Dreigang Poti. Anzeige für Motorstrom und Schneckendrehzahl. Schaltkasten mit Hauptschalter, Stromrichter, Netz- und Anker-Drosseln, Steuertrafo, Sicherungen, UNTERBAU: Arbeitshöhe 1350, Stahlrohrgestell, vorne und hinten Abdeckung, Zylinderstütze. LACKIERUNG RAL 6011/ 2004/ 7032

DALAKER-stroje pro výrobu plastů s.r.o. Strojárenstvo, stroje, priemysel
Flat film sheet line E 75 x 30 D / G

Flat film sheet line E 75 x 30 D / G

- Net width 800 mm - output up to 180 kg/h - Thickness range from 0,3 to 1,2 mm Extruder Type E75 x 30 D: 5 heating zones on cylinder a 4 kW AC-Motor 90 kW 1 Screen changer manual 1 Granulat feeding device monted on the extruder hopper 1 Flat die head, with flex lip adjustment 1 Three roll polishing Stack, roll width 900 mm 1 Take off unit with rwo rubber rolls, width 900 mm 1 Cutting unit with 3 knives 3 Water temperating units heating/cooling 2 Winding stations (back to back), working width 900 mm

DALAKER-stroje pro výrobu plastů s.r.o. Strojárenstvo, stroje, priemysel
Hot Mixer H200 / C600

Hot Mixer H200 / C600

Turbo Mixer of 200 litre of total capacity; Serviceable capacity of about 60 % of the toal capavity. - 6 to 8 batches per hour; - Stainless steel double-wall; - Polished internal surface; Inner wall of stainless steel AISI1316L and outside wall AISI1304; Mixing blades of stainless steel AISI1316L with a Colmonoy Coating High corrosion and abrasion resistant). DC motor with variable speed of 46, 8 kW. Power transnission by belts. Pneumatic system of lid opening by rotation. - Cooling Mixer of 600 litre of total capacity; - Stainless steel double-wall for intense cooling; - Colling of the vessel divided in different chambers; - Blades in stainless steel strengthened to avoid bending; - AC motor of 13,1 kW with variable speed by frequency inverter; - Power transmission by elastic coupling between bearing and gearbox; - Pneumatic system for lid opening by rotation; - Low noise level; - Supplied with an inner cooling ring for lower thermal conductivity materials, on request; - Painting: Main colour, white RAL 7032 - Guard, orange RAL 2008, - or other, to suit your requirements. - Electric: 3 x 380V, 50 Hz, or other to suit your requirements. Delivery: approx. 90 days from receipt of order and down payment and agreement of all technical details.

DALAKER-stroje pro výrobu plastů s.r.o. Strojárenstvo, stroje, priemysel
Thickness Measuring Instrument F1000/30

Thickness Measuring Instrument F1000/30

Foil Thickness Measuring Instrument F 1000/30: This handy measuring instrument is used exclusively to measure the thickness of thinfoils. The frame has the required rigidity, the isolation of the handle prevents transfer of heat from the hand of the user to the sensitive mechanical parts of the Dial Gauge, the most important bearing of which are made of sapphires. The measuring pressure is approximately 2 N. If required the instrument can be supplied with a higher measuring pressure of up to approximately 4,5 N or with a lower measuring pressure down to approximately 1,2 N. Technical Data F 1000/30: - Graduation 0.001 mm - Measuring range 1 mm - 1 rotation of the pointer 0.2 mm - Depth of jaw 30 mm - Feeler - diameter, flat 6.35 mm

DALAKER-stroje pro výrobu plastů s.r.o. Strojárenstvo, stroje, priemysel
Thickness Measuring Instrument J 50 R

Thickness Measuring Instrument J 50 R

Thickness Measuring Instrument J 50 R: The standard model has side discs at the lower roller for guiding the thread. The instrument is therefore suited for measuring thickness of wirws and threads especially in continuous motion. The gauge can be supplied without side discs. Without them the gauge is suitable for the measurement of paper, foil, metal, sheet etc. Technical Data J 50 R: - Graduation 0.01 mm - Measuring range 5 mm - Depth of jaw 50 mm - Width of the rollers 8.7 mm - Diameter of the rollers 8.4 mm

DALAKER-stroje pro výrobu plastů s.r.o. Strojárenstvo, stroje, priemysel
Thickness Measuring Instrument J45

Thickness Measuring Instrument J45

Up-to-date design with clear reading and handy pocket form. The Thickness Measuring Instrument and J 45 distinguish themselves at once by their up to date design.Their well thought out design offers a number of remarkable advantages. The scale has a diameter of 40 mm which gives a clear and easy read-out of 0.01mm. The mm-pointer is placed concentrically. The anvils are in contact when the instrument is not in use. The serrated liftingwheels opens them for the insertion of the component. The size can be easily read off the scale. The measuring pressure is approximately 1 N. The measuring gear train is completely separate from the lifting mechanism and lifting of anvils cannot affect the measurement. The instrument is equipped with plastic isulating plates. They can easily be zeroed by using the knurled adjusting bezel. J 45 are light and handy. Solid made they have a wide application for measuring accurately to 0.01 mm within their capacity 10 mm. Technical Data J45: - Graduation 0.01 mm - 1 revolution of the pointer 1 mm - Measuring range 10 mm - Depth of jaw 45 mm - Form of Feelers 6.35 mm diameter, flat - Also available in inch graduation

DALAKER-stroje pro výrobu plastů s.r.o. Strojárenstvo, stroje, priemysel
Thickness Measuring Instrument J15

Thickness Measuring Instrument J15

Up-to-date design with clear reading and handy pocket form. The Thickness Measuring Instrument J 15 distinguish themselves at once by their up to date design.Their well thought out design offers a number of remarkable advantages. The scale has a diameter of 40 mm which gives a clear and easy read-out of 0.01mm. The mm-pointer is placed concentrically. The anvils are in contact when the instrument is not in use. The serrated liftingwheels opens them for the insertion of the component. The size can be easily read off the scale. The measuring pressure is approximately 1 N. The measuring gear train is completely separate from the lifting mechanism and lifting of anvils cannot affect the measurement. The instrument is equipped with plastic isulating plates. They can easily be zeroed by using the knurled adjusting bezel. J 15 are light and handy. Solid made they have a wide application for measuring accurately to 0.01 mm within their capacity 10 mm. Technical Data J 15: - Graduation 0.01 mm - 1 revolution of the pointer 1 mm - Measuring range 10 mm - Depth of jaw 18 mm - Form of Feelers 6.35 mm diameter, flat - Also available in inch graduation

DALAKER-stroje pro výrobu plastů s.r.o. Strojárenstvo, stroje, priemysel
Zobraziť všetky ponuky v sekcii Strojárenstvo, stroje, priemysel