Registrácia

Test Separator

Test Separator
Test separator is used fo testing of free deposit water from produced natural gas. Gas is flowing into the separator through the neck Hl. Gaseous and liquid phases get separated due to stroke on deflector through internal construction. Gaseous phase is flowing out trough the neck H2 and further it continues into technological process. Liquid phase is collected on the bottom of the vessel horizontal part and in vertical cylindrical vessel it is automatically discharged through the neck H3 ( Fig.2). Manufacturer will supply test separator also as separate functional unit (Fig.1)built into warming object with temperature treatment including electric lighting and hot-water heating.

Constituent parts of this unit are:
- pipe branches for draining and gases including armatures
- test measuring orifice track DN 150 PN 100
- measuring and adjusting devices and aquipment including conection and supplywith control medium

Manufacturer produces technological pressure euquipment following customer´s technical requirements up to the volume 100 m3.

Production Time: 6-8 weeks / Typical delivery time up to 4-5 months

Vyžiadajte si cenovú ponuku alebo ďalšie informácie

Popíšte, čo potrebujete. Čím presnejšie informácie uvediete, tým lepšiu ponuku môžete dostať.

Vyplňte prosím svoje kontaktné údaje a získajte cenové ponuky, referencie a ďalšie informácie.

Odoslaním súhlasím so spracovaním osobných údajov

Vaša požiadavka bola odoslaná.

  1. Zadanú požiadavku operátor spracuje.
  2. Požiadavka bude adresovaná vhodným dodávateľom.
  3. Spätne vás budú kontaktovať záujemcovia.
  4. Sami sa rozhodnete, koho si vyberiete.

Ďakujeme, že ste nás kontaktovali.

Ďalšie ponuky v sekcii: Výroba

Kováčska výroba

Kováčska výroba

Predmetom podnikania je zámočnícka výroba, kováčska výroba, zváracie práce, konštrukcie, kovoobrábanie - sústruženie, frézovanie na cnc strojoch, pálenie - delenie materiálu na laserovom automate s presnosťou 0.1 mm. Firma zamestnáva cca 25 zamestnancov. Väčšinu svojej produkcie (až 80%) vyváža do zahraničia. Hlavnou činnostou je výroba kovaných a nerezových polotovarov, ktoré sa zváraju, alebo skladujú do rôznych dielcov zabradlí a mreží. Vo svojom katalógu máme viac ako 2000 kováčskych produktov a polotovarov. Nechajte sa našími výrobkami inšpirovať a tešíme sa na Vašu návštevu opäť.

EURO-METALL s.r.o. Výroba
Mobile rig GVS 3070

Mobile rig GVS 3070

The drilling rig GVS 3070 is back instyl self-propelled servicing and workover rig built on a carrier Tatra T 815, 12 x 8, powered by a Caterpillar 3406 engine. The carrier has six supporting axles, four of which are driven. Two front axles and two rear axles are steerable, that provides short turning radius, good steerability of the rig also in difficult grounds. It is equipped with driving booster, double – circuit brakes. The cabin is equipped with 2 + 2 seats. Hook load capacity 700 kN enables drilling by drill stem of diameter 3 1/2 to the depth of 1 800 m and to make workovers up to the depth 4 000 m with 2 7/8 tubing.

NSG Technology, a.s. Výroba
Tool joints

Tool joints

Technical description: Tool joints are set for welding onto drill pipes. They are manufactured with box thread and with pin thread. One tool joint with box thread and one tool joint with pin thread create a couple. One tool joint with pin thread and one tool joint with box thread are welded-on to ends of drill pipe manufactured in accordance with API SPEC 5D. Material: Tool joints are produced from heat treated alloy steel. Mechanical properties of tool joints material comply with minimum requirements of API SPEC 7 and they are shown in table.

NSG Technology, a.s. Výroba
Gate valve

Gate valve

Maximum working pressure 21 MPa, 35 MPa, Size 2 1/6 , 3 1/8 USE: The valve is designed for wellhead equipment, Christmas trees and as a component of manifolds for production of crude oll and natural gas. Temperature class P, material class AA, or BB, PSL 1, PR 1. Technical parameters: Gate valve is duat closing fitting, manually operated. Body and bonnet are low-alloy steel castings. Gate, seats and nut for AA material class are made from low-alloy steel, for BB material class they are made from stainless steel. The spindle is made from stainless steel. Closed and open position can be reached by turning operating wheel all the way. The valve is connected by flanges with dimensions according to API Spec 6A.

NSG Technology, a.s. Výroba
Heater is used for increasing

Heater is used for increasing

Gas heater is used for increasing of natural gas temerature intechnological process of its production, processing, transportation and storage. Increased gas temperature prevents formation of hydrates and gas freezing during pressure expansion and in winter time. The heater consist in four main parts: 1. Heater shell with insulation filled in with heat – conveying medium 2. Flue with a cover 3. Heating coil with a cover 4. Heating and combustion system with measuring and regulation Supply options: I. II. separate heater body with flue and heating coil fixed on supports or skids complete heater with combustion system completed with measuring andregulation In accordance with customer´s request it is possible to manufacture also heaters with bester perfomances. Heating coil can be manufactured in various diameter and pressure dimensions (max.25MPa) Production Time: 1,5-2 months (

NSG Technology, a.s. Výroba
Underground tank

Underground tank

Double - shell tank is designed for construction of underground fuels storage of oil substances. It allows construction of ecologically safe storage of mentioned substances, which from the point of view of STN / SN 65 0201 standard belong to combustible liquids of 1st class of danger. Tand construction takes into account requirements of STN / SN 65 0201 standard Flammable liquids - Plants and storage rooms , SNT / SN 75 34 15 standard Plants for fandling of petroleum matters and their storage , STN / SN 69 0005 standard Stationary pressureless vessels - technical rules . The inner vessel shell is designed for bestest working pressure in inter-shell space 0,045 MPa. Wall thickness is designed with allowance for corrosion min. 1 mm. Inner tank represents operational part. Outer shell creates a protection for inner tank and prevents stored substance to eventual leakage out into surroundings. Inner tank shell as well as outer shell is welded from steel plates. Cylindrical parts are closed by vaulted bottoms according to DIN 6 608 standard. Both shells are liquid tight and separated each from other by delimitation plates, which also avoid their mutual displacement. Inter - shell space serves for indication of inner, respectively outer shell damage. Production Time: 6 weeks / Typical delivery time: 3-4 month

NSG Technology, a.s. Výroba
Zobraziť všetky ponuky v sekcii Výroba