Registrácia

Tubular products

Tubular products
Tubular products 2
Tubular products 3
Tubular products 4
Tubular products 5
Sandvik is a leading manufacturer of seamless tube and pipe in an extensive program of stainless steels, nickel alloys, titanium, zirconium and other advanced materials. Sizes range from 0.5 to 260 mm (0.01968 to 10.23 inch) outside diameter.

Our stock program covers, for example, stainless tube and pipe according to ANSI/ASME and ISO/EN. We also hold a large stock of fittings, flanges and welded tubes.

High-performance materials
Sandvik provides a wide range of high-performance materials for demanding applications. Here are some examples:
- Duplex, super-duplex and hyper-duplex stainless steels
- Sandvik Sanicro 25 for coal-fired power boilers
- Sanmac stainless steels for machining
- Titanium and zirconium

- ANSI/ASME pipe
- Bimetallic tube
- Boiler tubes
- Cannula tube
- Capillary tubes
- Chemical injection lines
- Coiled tubing
- Composite tubes
- Condensor tubes
- Connector Sandvik ClikLoc
- Control lines
- Downhole casing
- Ethylene furnace tubes
- Evaporator tubes
- Feedwater heater tubes
- Finned tubes
- Fittings
- Flanges
- Flowline piping
- Furnace tubes
- Heat exchanger tubes
- High-pressure tubes
- ....

Vyžiadajte si cenovú ponuku alebo ďalšie informácie

Popíšte, čo potrebujete. Čím presnejšie informácie uvediete, tým lepšiu ponuku môžete dostať.

Vyplňte prosím svoje kontaktné údaje a získajte cenové ponuky, referencie a ďalšie informácie.

Odoslaním súhlasím so spracovaním osobných údajov

Vaša požiadavka bola odoslaná.

  1. Zadanú požiadavku operátor spracuje.
  2. Požiadavka bude adresovaná vhodným dodávateľom.
  3. Spätne vás budú kontaktovať záujemcovia.
  4. Sami sa rozhodnete, koho si vyberiete.

Ďakujeme, že ste nás kontaktovali.

Ďalšie ponuky v sekcii: Strojárenstvo, stroje, priemysel

Výroba kovových, lisovaných dílů, svařovaných výrobků, výrobou pro automobilový a počítačový průmysl

Výroba kovových, lisovaných dílů, svařovaných výrobků, výrobou pro automobilový a počítačový průmysl

Naše firma se zabývá výrobou kovových, lisovaných dílů, svařovaných výrobků, výrobou pro automobilový a počítačový průmysl a výrobou spotřebního dekorativního zboží. Velký objem výroby tvoří speciální obaly pro přepravu automobilových komponentů. Dále vyrábíme kovové svícny a stojany na květiny ve velkých množstvích. Orientujeme se jak na produkci vlastních výrobků, tak i na výrobky zákaznické. Naše technologické zázemí a profesní zkušenost nám umožňují reagovat na různé požadavky zákazníků. Jsme schopni zajistit dle přání zákazníka výrobu od konstrukce až po konečnou montáž výrobku, v malých sériích i ve velkých množstvích. Používáme technologie lisování na excentrických a hydraulických lisech, ohýbání, dělení, stříhání, bodové svařování, svařování MAG, TIG, automatové svařování, lakování práškovou barvou. Pro svoji potřebu si rovněž sami vyrábíme lisovací nářadí a přípravky. Máme rovněž zkušenosti s výrobou forem na plasty a s dodávkou plastových dílů od subdodavatelů.Většina produkce je určena do zemí EU.

Emko Motor, spol. s r.o. Strojárenstvo, stroje, priemysel
Wire

Wire

Sandvik is a leading manufacturer of wire in a wide range of materials including stainless steels and nickel alloys. Our extensive application knowledge makes it possible for us to recommend the optimum wire for any wire application, resulting in enhanced end-product performance. The Sandvik wire program includes: - Round wire - Flat wire - Shaped wire (profiles) The round wire is available with a wide range of coatings and a variety of surface finishes. Sandvik wire is supplied on spools, in coils or as straightened lengths. Our comprehensive testing capabilities enables us to provide full documentation on product properties. - Round wire - Flat wire - Shaped wire (profiles) - Insulation and coating - Free-cutting steels - Medical wire - Rig rod - Spring wire - Wirelines

Sandvik Chomutov s.r.o. Strojárenstvo, stroje, priemysel
Welding products

Welding products

Sandvik offers a complete program of products for welding austenitic stainess steels, duplex stainless steels and nickel alloys. For most standard grades there are variants with both normal and high silicon content to suit different welding methods. Sandvik s welding products are characterized by chemical composition within close tolerances and consistency between heats and batches, facilitating trouble-free welding and high-quality welding joints. Our welding products - MIG wire - TIG wire - SAW wire - Covered electrodes - Strip electrodes - Welding flux - Root flux - Pickling paste

Sandvik Chomutov s.r.o. Strojárenstvo, stroje, priemysel
Strip steel and strip-based products

Strip steel and strip-based products

Sandvik is a leading manufacturer of strip steel and a variety of strip-based products. Our strip steel program includes an extensive range of steel grades with very good properties with respect to, for example, strength, hardness and workability. The Sandvik range of strip steel covers thicknesses from 0.015 to 5 mm (0.0005 to 0.2 inch) in widths up to 1200 mm (47.25 inch). We are widely acknowledged for our excellence in thin precision strip steel and coated strip steel. Products: Compressor valve strip steel Strip steel for the production of flapper valves Cr?ping blades Paper cr?ping blades Knife strip steel Strip steel for the manufacturing of knives, scissors and other edge tools Spring strip steel Strip steel for a wide range of spring applications Wood band saw steel Strip steel for the manufacturing of wood band saw blades

Sandvik Chomutov s.r.o. Strojárenstvo, stroje, priemysel
Steel belts and processing systems

Steel belts and processing systems

Sandvik is a leading supplier of steel belt and belt-based processing systems. Based on extensive application knowledge our products and services contribute to improved productivity, reliability and cost efficiency in a wide variety of applications in, for example, the chemical, food and wood-based panel industries. Extensive technical services Sandvik provides a wide range of technical services, covering everything from steel belt inspection and repair to design and engineering of new processing plants. Our products Steel belts Stainless steel belt and carbon steel belt in for example plain, ground, polished and perforated condition available in open length, prepared and/or scribed or as endless steel belts. Press plates Press plates with textured or smooth surfaces for the production of decorative laminates, technical laminates, multilayer laminates and coating of wood based panels. Processing systems and conveyors Systems for processing and conveying of, for example chemicals or food.

Sandvik Chomutov s.r.o. Strojárenstvo, stroje, priemysel

Hot isostatic pressed (HIP) products

Sandvik is a world-leading producer of near-net shape (NNS) products produced by hot isostatic pressing (HIP). Sandviks HIP products are based on powder metallurgy and range from 100 grams to 15 tonnes in weight. They are produced in a wide range of materials, such as: - austenitic stainless steels - duplex stainless steels - martensitic steels - metal matrix composites (MMC) - nickel alloys - titanium Enhanced product properties The ability to manufacture HIP products with irregular shapes and complex geometry offers several advantages compared to castings, forgings and fabricated materials - both in terms of design flexibility and material properties. The fine microstructure and isostatic pressure with which the HIP products are processed result in isotropic mechanical properties, that is properties that are equal in all directions. The isotropic properties can contribute to, for example, lighter constructions. Main advantages with products produced by hot isostatic pressing: - increased design flexibility - reduction of costly operations like machining and welding - improved process safety - enhanced material properties

Sandvik Chomutov s.r.o. Strojárenstvo, stroje, priemysel
Zobraziť všetky ponuky v sekcii Strojárenstvo, stroje, priemysel